The only ramp door type hinge we have that is weld on with a removable pin is the Aluminum # PLR1005. While the Ramp Door Hinge # PLR1902 you found does not have a removable pin you could weld it to a removable plate on the trailer which would then allow you to remove the entire ramp along with the hinges. view full answer...
It sounds like you're looking for a hinge like the Ramp Door Hinge # PLR1902. This heavy-duty hinge replaces a damaged hinge on your trailer's ramp or access door. It has a steel construction and grease zerk fitting to easily grease it for easy operation. The bracket measures 4" long x 2-5/8" wide; x 1/4" thick and the pin is 8-3/16" long x 1" diameter. This has a raw finish and is made in the USA. view full answer...
You can purchase the Strap Hinge for Enclosed Cargo Trailer Doors 180 right here at etrailer.com.
All you need to do is click this product number: # 2512
This will bring you to the product page where you can enter the quantity you need and you'll be all set. view full answer...
Polar T-Strap Hinge for Side and Rear Trailer Doors # PLR3416 is galvanized (zinc-plated) steel but not stainless steel. The zinc coating helps resist corrosion. For a similar hinge that is stainless steel we offer Polar part # PLR3416-SS. view full answer...
We carry all sorts of RV door parts including hinges and latches that you can see on the linked pages. I included links to hinges, latches and weather-stripping like # WS1434 and vinyl trim like # CAM25103.
Since trailer makers do not keep track of this type of part your best bet for matching up to your trailer is to simply review the items shown to find what will work on your RV. view full answer...
We don't have exactly what you are looking for. The # PLR1904-Z you referenced is 3-1/8 inch without the strap. The best other option is the Ramp Door Hinge - Steel # PLR1902 which utilizes as different hinge style and welds flat. It is 4 inches wide but without the bend. These are the only ramp door and dump door hinges we carry. view full answer...
The Redline replacement hinge you referenced, part # H300, measures 3- x 72-inches but is not pre-drilled. This is because this part is designed for multiple installation methods - by welding or by use of fasteners you supply. We also offer a stainless steel version, part # SH300. These hinges do not carry a specific weight capacity since that will depend on the strength of the surface they mount on. For a 150-lb door I recommend the stainless steel hinge # SH300.
This hinge can be cut... view full answer...
It looks like the # BV0534-00 would work for you since you said that your roof vent has the same style of hinge that this cover has.
When picking out a replacement roof vent cover the most important factor is the hinge style. Since yours has the continuous hinge then the # BV0534-00 would be the correct one to use.
I attached an install video for you to check out as well. view full answer...
I linked our main pages for trailer cam door locks and for all door-related items to help you see our wide range of products. These include cam door locks such as # 383200. Although we do not handle the Imperial Stamping products odds are very good that we can help you find what you need.
If you cannot find what you're looking for on the linked pages you can submit a photo of your trailer lock and/or the part you need that will help a lot. view full answer...
The # PLR2212-SSP is the hinge you're looking for. Polar's part number is 2212-SSP, our part number is # PLR2212-SSP. It's the same exact part, but we add a prefix onto it for our inventory system.
You can see a product description video for the hinge by clicking the provided link. view full answer...
We currently only offer a 2" piano hinge with a 1/4" diameter pin in a 72" length so you would need to purchase two and cut one down to cover the rest of the 83-1/2" of length you're needing. view full answer...
I think what you are stating is that all the latches you have looked at for your entry door operate the opposite of what you need for your application. I suggest you consider the Global Link Ultra E Pro Electronic Lock for Travel Trailer w Keyed Alike Option that comes in a right hand configuration, # 295-000183 and a left hand configuration, # 295-000185.
These use the same cut out as standard travel trailer locks, 3-3/4" tall x 2-3/4" wide. This is a dual lock that lets you lock only... view full answer...
We have several hinge pins like # HP412G that I have linked for you, but it sounds like you need actual springs. We have some heavy duty ramp springs like # RS16933RH and # RS16933LH if you happen to have a heavy duty equipment trailer like what they haul tractors and other large equipment on.
For an open utility trailer you may be able to use a tailgate assist like # RA-27C. Or for an enclosed trailer we have springs that are similar to garage door systems. I have linked those as well.... view full answer...
Yes, you're looking for the Global Link Ultra E Pro Electronic Lock # 295-000185. This electronic lock for travel trailers has a built-in touchpad for keyless entry. The full-size handle provides an easier grip and integrated deadbolt system offers additional security. view full answer...
For an offset handle you will want to use the Cam-Action Lockable Door Latch Kit # PLR3057 that you can use to attach to a length of schedule 40 3/4" pipe. You will be able to have the hinges and latch welded in place where you need to ensure that the handle is where you want it. view full answer...
Unfortunately, I have no way to look up what door was installed on your 2018 Winnebago Micro Minnie but I can help you to determine a replacement option. First you will want to look at your door for any tags which may say it is Thin Shade Compatible. This means you can install the Lippert Thin Shade # LC806621 which will use a tinted glass and has a built in shade for additional privacy. You can also check that this will fit by opening the door and getting the manufacturer information on... view full answer...
The Victory Manual Fold-Down Steps for RV and Toy Hauler Patios, # LC726895 only have mounting position of handrail on the left side.
The Victory steps, # LC726895 are intended more for patios and ramp doors on toy hauler models. If you let me know what your camper is and your application, I can try to find another option for you. view full answer...
Here at etrailer we can supply just about any type of trailer parts you might need, from replacement door hardware to fans, vents, hubs, brakes, springs, bearings, wheels, lighting, tires even axles and cooking supplies - you can pretty much name it and we have it. However, we do not offer a design service for fabricating a tear drop trailer from scratch, nor ready-made plans for building a trailer.
The link provided will show you our main page for all camper trailer parts and accessories.... view full answer...
Unfortunately, Fulton doesn't offer a a folding coupler hinge kit for a 2 x 2 inch trailer tongue. I have heard from some of our customers that they've used a couple of pieces of 1/2 inch steel plate plate cut to the appropriate size to shim out one side of the 2 x 2 trailer tongue so a hinge for a 2 x 3 hinge kit like the # FHDPW230300 weld-on or # FHDPB230101 bolt-on hinge can be used. view full answer...
Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer.
In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14".
To pick the correct cover, you will also need to know the type of hinge you need.
There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco... view full answer...
Go To Results